GTA
All Springer/NP/PCP Air Gun Discussion General => European/Asian Air Gun Gates => China/Asian AirGun Gate => Topic started by: joek on January 09, 2015, 07:20:06 PM
-
IMO this rifles design is better than the Daisy 22SG or the 880's I've owned in that the trigger and hammer have separate springs, so should be able to improve.
-
Now that's interesting. This is the first newly designed pumper that's come out in awhile. I wish they had a more classic look to them but I doubt that'll happen as all of Umarex branded offerings tend to be tactifuturistic looking.
-
Did you have to drill the pivot pin out in the pump arm? And if so, how do you plan on replacing it? And thank you for sharing this. I was waiting for someone to do it.
-
I left the pump in the compression tube, If I end up doing any mods to the piston head I'll remove the pin. it looks like one end can be cleaned up and pressed out. Had a brain fart putting the gun back together last night, applied pressure to the pellet tray when installing the valve/barrel and cracked it. did a quick fix for now. plan on converting the rifle to pellet only, and will be modding the tray and probe anyway.
-
I like the gun, I like the stock, I like the performance for a $50 gun. The trigger don't bother me and the auto safety don't bother me. Some of my better break barrels have auto saftey. I actually look at it as a feature. I think, unless you find something significant to make it worth the effort, I'm gonna leave mine alone. I did apply my homemade peep sight. I'll save that for another thread as I am going to make that design available to those interested. Again... thanks for sharing.. looking forward to more.