GTA

Support Equipment For PCP/HPA/CO2 and springers ,rams => All Air Gun Accessories Gate => Topic started by: Monkeydad1969 on January 02, 2015, 08:33:07 PM

Title: BNM barrel bands---IDK
Post by: Monkeydad1969 on January 02, 2015, 08:33:07 PM

I ordered 2 bands from BNM.  I ordered BB1003 for the 7/16" barrel using both set screws.  I also order BB1003 for a shroud using both set screws.  They ran out of the BB1003 bands for the shroud, so they took 5.00 off of BB1004 with the o-ring.  I got them today.  They sent me BB1004 for the 7/16" barrel using an o-ring, not BB1003 and the set screw is off center.  BB1004 has a thin wall for the o-ring, very thin...as in a hole in the wall and a gap in the o-ring.  I sent Sergio an email.  But this really hurt my feelings.  Pics follow...

(http://i1302.photobucket.com/albums/ag124/josephb1969/IMAG1935_zps2286db02.jpg)

(http://i1302.photobucket.com/albums/ag124/josephb1969/IMAG1934_zps4bfeedcb.jpg)

Title: Re: BNM barrel bands---IDK
Post by: UCChris on January 02, 2015, 08:53:56 PM

That is odd. Both of my barrel bands that I've ordered are perfect.

Title: Re: BNM barrel bands---IDK
Post by: Monkeydad1969 on January 17, 2015, 11:24:44 PM

So my replacements came in.  Happy with the band for the bare barrel and 1/4" riser, but the band for a 1" shroud still has the gap and I guess that is how it is.  I think his pics on his site should reflect that.  I will still see how it works when I get my 1" shroud.

(http://i1302.photobucket.com/albums/ag124/josephb1969/IMAG1950_zpsb3413c1d.jpg)

Joe