GTA

All Springer/NP/PCP Air Gun Discussion General => Machine Shop Talk & AG Parts Machining => Show us your Custom Airgun Parts (TRICKS-N-TIPS) => Topic started by: ped on December 30, 2014, 06:21:16 PM

Title: a bit of brass for a phase 2 1322 medalist
Post by: ped on December 30, 2014, 06:21:16 PM

recently picked up a used phase2 barrel and plastic breech for spares and after looking at the stock plastic breech i decided to make a brass one
i've made it a bit longer for more barrel support and room for a short scope rail and drilled it for a breech screw
i've also made a two part pivot plug that will be tapped 1/2"unf so an ldc can be screwed in
ped

Title: Re: a bit of brass for a phase 2 1322 medalist
Post by: Rescue35 on January 01, 2015, 08:21:26 AM

Nice work.

Title: Re: a bit of brass for a phase 2 1322 medalist
Post by: mafatone on January 01, 2015, 02:23:47 PM

Nicely Done