GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: howie1968 on December 30, 2014, 01:50:19 PM

Title: what size allen wrench do i need to open the 3 screws on 2400kt trigger
Post by: howie1968 on December 30, 2014, 01:50:19 PM

what size allen head do i need to open up the trigger assembly on a 2400 kt.  i want to get in there and smooth the sear  up some and make it smoother  thank you all in advance

Title: Re: what size allen wrench do i need to open the 3 screws on 2400kt trigger
Post by: D14Jeff on December 30, 2014, 04:26:10 PM

1/16

Title: Re: what size allen wrench do i need to open the 3 screws on 2400kt trigger
Post by: Railbuggy on December 30, 2014, 08:17:32 PM

1/16-I concur. Did not try a metric but my 1/16 had some play.

1.5 metric will loose fit also.