GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: thepeck on December 16, 2014, 01:06:20 PM
-
Hi,
Does anyone know if there is a kit available of service parts for a hatsan pcp pump?
-
Hi,
Does anyone know if there is a kit available of service parts for a hatsan pcp pump?
Pyramid sells an o-ring kit for the Air Venturi G4 pump, which I'm fairly certain is the same as the Hatsan Pump.
-
yup, its the same pump, down to the same short stiff as a board hose
If rebuilding this unit keep a spare kit, that unit for some reason eats o-rings from my experience. After having to rebuild that pump 2x within 6 months, I decided to junk it & get a tank.
-
yup, its the same pump, down to the same short stiff as a board hose
If rebuilding this unit keep a spare kit, that unit for some reason eats o-rings from my experience. After having to rebuild that pump 2x within 6 months, I decided to junk it & get a tank.
I love the one I have. It pumps much easier then my Benji.
Mine was eating the inner o-ring and then I used a piece of rag on the end of a gun cleaning rod/jag in my cordless drill with some Mother's Mag Polish on it. Now the pump is even easier to work and doesn't eat o-rings. It looks like a mirror on each inner tube.