GTA
Support Equipment For PCP/HPA/CO2 and springers ,rams => Support Equipment For PCP/HPA/CO2 => Topic started by: CurmudgeInn on October 30, 2014, 09:39:48 PM
-
I while back I picked up a Hill pump. Last week I got in my Cricket .25. Currently I only have dive tanks and my local shop will only fill them to around 3200psi. After a few fillings on the cricket I am below 3k psi. From what I understand the hill can pump to 3300PSI. Is this correct? Until I can afford a SCBA tank I will be pumping by hand. (good for my fat belly). Do any of you pump 3k psi rifles at all?
-
From what everyone preaches about the Hill's it should have no problem doing that. I have a Air Venturi G4 and pump a 13ci and 17ci bottle to 3000 with ease. My 1720T to 3200 without much effort at all. Now the Benji pump I have is much better suited to the Disco at 2K. beyond that and you have to work.
-
From what everyone preaches about the Hill's it should have no problem doing that. I have a Air Venturi G4 and pump a 13ci and 17ci bottle to 3000 with ease. My 1720T to 3200 without much effort at all. Now the Benji pump I have is much better suited to the Disco at 2K. beyond that and you have to work.
Just pumped it from 3k to 33200 with out an issue. :-)
-
I fill my MK4 up to 3300 psi with the benjamin pump... so I would think that the Hill would have no problems.
Just watch the o-rings inside for wear and breaking.