GTA
Airguns by Make and Model => Vintage Air Gun Gate => Topic started by: rws45user on September 26, 2014, 06:57:01 AM
-
Hi all. I was wondering if its possible to connect a pcp screw in cylinder the long thin ones with the gauge on the end and have the air thats pumped from the handle go into the cylinder where it could be stored and pressurized and then be released like a pcp releases a certain amount of air per shot to make the gun work like the fx independence. The fx cost 1,799.00 dollars . This cylinder is 119.00 http ://www.pyramydair.com/s/a/Hatsan_Air_Cylinder_Fits_Hatsan_AT_P1_AT_P2_Air_Pistols/4885 .And I think would work good . On the fx once its filled up after 1 shot at 1,000 fps according the this http ://www.fxairguns.com/rifle/the-independence/ you pump 3 times in 22 cal and it brings it back to full power . Even If you could only get one good shot out of the 392 rigged up with the cylinder, but only have to pump it 3 times and have something like 800 fps I think it would be worth it for the cost of the valves, connections and cylinder needed to make it work . Has anyone gave any though to this . http ://youtu.be/-jbzc-ssiJs. close the space between the http and the :// and copy and paste to go to the links .
-
Edit: wrong gate sorry :-[
Here is my reply:http://www.gatewaytoairguns.org/GTA/index.php?topic=75595.new#new (http://www.gatewaytoairguns.org/GTA/index.php?topic=75595.new#new)
Sorry for the double post...
Joseph