GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: Tommy on August 02, 2014, 12:08:49 PM
-
First of all I am not very smart when it comes to screws. What I want to do is replace what I can on my Disco to high strength and silver colored [stainless etc.] I am looking for a list of sizes and strenghts that I could take with me to Ace and pick up the screws neccesary. The valve screws, the two screws back by the adjuster [which I will change to ss eventually] and the stock screw by the gauge.
Thanks for helping make this simple
Tommy
-
Stainless screws for the valve would be a bad idea, unless you know the tensile strength of the ones you are buying.... and the bright plated screws you will find at a hardware store, even if you could find the correct ones, would NOT be high tensile screws.... All the screws you mention are the same thread, 8-32....
Bob