GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: moe on June 22, 2014, 08:15:17 PM

Title: Outer Valve Spring Compression adjustment on Hatsan at-44 pa
Post by: moe on June 22, 2014, 08:15:17 PM

Does anybody know how to adjust and remove the outer valve spring on Hatsan at-44 pa? HELP!

Title: Re: Outer Valve Spring Compression adjustment on Hatsan at-44 pa
Post by: brzryder on June 22, 2014, 08:54:23 PM

Welcome aboard :)

Title: Re: Outer Valve Spring Compression adjustment on Hatsan at-44 pa
Post by: stonykill on June 22, 2014, 09:36:14 PM

Welcome !!!!!!!!!!!!

Title: Re: Outer Valve Spring Compression adjustment on Hatsan at-44 pa
Post by: mudduck48 on June 22, 2014, 10:43:12 PM

Welcome to the GTA.  :D

Title: Re: Outer Valve Spring Compression adjustment on Hatsan at-44 pa
Post by: rsterne on June 22, 2014, 11:12:26 PM

Only one valve spring I am aware of, that is inside the valve, which is inside the air reservoir.... First step is to remove the reservoir and degass it using the tool that came with the rifle.... Remove the valve, then carefully pry out the white plastic retainer.... When it comes free it can launch the valve spring and retainer across the room....

Bob

Title: Re: Outer Valve Spring Compression adjustment on Hatsan at-44 pa
Post by: amb5500c on June 23, 2014, 05:19:27 PM

Welcome to the GTA.
Richard