GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: cooter472 on June 22, 2014, 02:18:37 AM

Title: S-Rod Shroud OD
Post by: cooter472 on June 22, 2014, 02:18:37 AM

I'm trying to get an average on a .25 at the muzzle end and right before barrel protector

Title: Re: S-Rod Shroud OD
Post by: FuzzyGrub on June 22, 2014, 07:56:52 AM

The Mrod1 and Srod use the same shroud part number.  The OD is is 0.880". 

The OD of the shroud endcap is slightly smaller than shroud at 0.860".   

From your verbal description, you may want something else, but I don't know what you are calling a barrel protector.   A pic or a parts diagram item number would help clarify if I didn't provide what you are looking for.

Title: Re: S-Rod Shroud OD
Post by: cooter472 on June 22, 2014, 03:51:25 PM

sorry barrel band