GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: bmwm3smg on June 12, 2014, 03:50:04 PM

Title: Maximum fill pressure for the Air Arms S500 cylinder?
Post by: bmwm3smg on June 12, 2014, 03:50:04 PM

I am wanting to modify an Air Arms S500 (by adding a stronger hammer spring or a spacer on the hammer) to use a higher fill pressure to achieve more shots per fill (by closing the valve port down a little). What is the highest you guys would up the pressure on the Air Arms cylinder? Would it be worth it?

Thanks!