GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: nekro on June 10, 2014, 12:12:19 PM

Title: hpa tank fill adapter?
Post by: nekro on June 10, 2014, 12:12:19 PM

I work at a fire station. so I am trying to find an adapter to fill an hpa tank from a scba fill station.

Title: Re: hpa tank fill adapter?
Post by: NinjaPaintballRay on June 10, 2014, 12:57:28 PM

need to find out what is on your scba valve - usually cga 347 but check to make sure.

once you know this i can help you out

Title: Re: hpa tank fill adapter?
Post by: nekro on June 10, 2014, 04:21:53 PM

We use msa.

Title: Re: hpa tank fill adapter?
Post by: NinjaPaintballRay on June 10, 2014, 04:23:51 PM

ok and not sure what cga they use, can you look in the manual or contact them?

Title: Re: hpa tank fill adapter?
Post by: nekro on June 10, 2014, 10:38:51 PM

cga is 347

Title: Re: hpa tank fill adapter?
Post by: NinjaPaintballRay on June 11, 2014, 11:07:24 AM

ok and that cga is fairly common so if you google it you will find lots of places to get it.

we do not offer a transfer station with that cga but if you get the ninja002 you can remove the ufa and adapter and put in a cga 347. the hole is a 1/4 npt female port and most cga fittings will have the male 1/4 npt.

keep in mind this does not regulate so you will fill whatever is in the scba to the gun/smaller tank, watch closely so you do not overfill.

let me know if you need more help.