GTA

Airguns by Make and Model => Cometa Airguns => Topic started by: bobbyjim on May 27, 2014, 08:03:08 PM

Title: RWS92 Seal
Post by: bobbyjim on May 27, 2014, 08:03:08 PM

Anyone know were I can get a piston seal for a RWS92 (Cometa)?  It's a 26mm and I know that JM lists seals for Cometa's but want one that says it for a RWS92.

Title: Re: RWS92 Seal
Post by: OleTomCat on May 28, 2014, 06:34:58 PM

Not sure, but the best way to figure it out is to take it apart and measure the seal first then look at his sight and see what he has that is close enough...

This one looks like the correct diameter but not sure about how it attaches, how does the Cometa seal attach?  http://www.airrifleheadquarters.com/catalog/item/251485/43077.htm (http://www.airrifleheadquarters.com/catalog/item/251485/43077.htm)

Title: Re: RWS92 Seal
Post by: bobbyjim on May 28, 2014, 09:10:50 PM

There exactly like a Gamo or Crosman. Same type seal except there 26mm instead of 25.

Title: Re: RWS92 Seal
Post by: OleTomCat on May 28, 2014, 09:47:28 PM

Check out air rifle headquarters.....

Title: Re: RWS92 Seal
Post by: Roadworthy on May 29, 2014, 01:06:04 AM

I'll agree with Al.  Go to http://www.airrifleheadquarters.com/page/page/251488.htm (http://www.airrifleheadquarters.com/page/page/251488.htm) and look under seals.  He has dimensions for them.  You'll have to convert to inches.  He also gives instructions for turning down seals if too large.  They are a parachute seal so the precise size is not critical.