GTA
Airguns by Make and Model => Crosman Airguns => Topic started by: eaguila on May 21, 2014, 11:10:21 PM
-
hi guys. I have a 2400kt with a 19 inch barrel, and im going to put an after market valve, port, and hammer spring from alliance hobby that would prolly limit my shot count if using a powerlet. im thinking of using a hipac, then fill it with CO2 (higher shot count than compressed air?) with the CO2 fill adapter with bleed valve from PA. do you guys think this is worth my while or is there an easier and cheaper way to do this?
-
Yeah go to http://www.airgunbna.com/ (http://www.airgunbna.com/) for your valve the boss valve for your gun is only $36.95 and shipping is $6 cheaper than where your getting yours there are other places to get the other parts your looking for ceck Ebay for the tp there is one that has a complete seal covering it the guy selling them is a CAPOF member he will have your hammer spring also just ask him
-
Here is a link to your t/p http://www.ebay.com/itm/BOSS-BUDDY-HIGH-FLOW-Transfer-Port-for-Crosman-2240-1377-etc-IMPROVED-FLOW-25-/291113279466?pt=LH_DefaultDomain_0&hash=item43c7b41fea (http://www.ebay.com/itm/BOSS-BUDDY-HIGH-FLOW-Transfer-Port-for-Crosman-2240-1377-etc-IMPROVED-FLOW-25-/291113279466?pt=LH_DefaultDomain_0&hash=item43c7b41fea)
and you can check out his store he has hammer springs hope this helps
-
already bought the hammer spring, valve, and transfer port, on its way here... still thinking about bulk filling tho. thanks for the links man