GTA

Airguns by Make and Model => Crosman Airguns => Topic started by: pellet man on May 11, 2014, 10:08:13 AM

Title: Crosman Vantage NP
Post by: pellet man on May 11, 2014, 10:08:13 AM
Hi just read something that made me think I might be able to change barrel on my vantage np from .177 to .22. I really like working on stuff and new to this hobby. I did a search but no results. Also parts for Crosman I hear you can buy them cheap from Crosman but can't find them on there web site. Thanks for any advice.
Title: Re: Crosman Vantage NP
Post by: Big Bore Bart on May 11, 2014, 02:13:11 PM
  Bottom right corner, download the manuals.    Then when you have the part #s that you want, you call with your card ready.   All part orders are best done over the phone.    You give the pn they tell you the price.    Shipping is a flat $4.00 for most orders


  HTH  Bart.
Title: Re: Crosman Vantage NP
Post by: gene_sc on May 11, 2014, 02:21:47 PM
Changing out a barrel on the rifle could be a real pain. I don't know if they have changed the way they installed there barrels but a few years ago they were pressed and pined. It was almost impossible to remove a barrel from the breech with out a press.

Best of luck

Gene
Title: Re: Crosman Vantage NP
Post by: Roadworthy on May 11, 2014, 05:21:53 PM
The Crosman Vantage is a break barrel, I believe.  For most of them you simply remove the stock to access the pivot screw and remove the pivot screw.  The barrel is then free to go.
Title: Re: Crosman Vantage NP
Post by: pellet man on May 11, 2014, 09:58:04 PM
Thanks I just like to mess with stuff want to learn what I can do I have really good shop but not much knowledge with these guns. Parts are a big thing I could not see anything in the bottom right corner to click on. Again thanks I just want to learn.

Title: Re: Crosman Vantage NP
Post by: Big Bore Bart on May 11, 2014, 10:13:56 PM
  Crosman's web site, bottom right corner where it says "Customer Service"  Click the "Download Manual/Parts Diagram" link.
Title: Re: Crosman Vantage NP
Post by: pellet man on May 12, 2014, 08:58:26 AM
Thanks i'll do that now.
Title: Re: Crosman Vantage NP
Post by: punkguy0017 on May 13, 2014, 11:48:19 AM
Well what happened? did u find the link? did u download the manual? did you order the parts? what happened!!?
To be continued .......
Title: Re: Crosman Vantage NP
Post by: pellet man on May 13, 2014, 03:48:17 PM
Yes I found it thanks working on what to do next. I just ordered a 2300KT from custom shop so been thinking about that. I think a new gun would probable be better I don't know what interchanges. Need more experience.
Title: Re: Crosman Vantage NP
Post by: Big Bore Bart on May 13, 2014, 08:51:33 PM
  It's a B18/19 like most of the Crosman springers.    The barrel for the Nitro Venom .22 should be a drop in fit.  Look closely at the detent and the alive jam on yours and a NV at a store.  If they are the same you're good to go.
Title: Re: Crosman Vantage NP
Post by: pellet man on May 14, 2014, 11:16:32 PM
Thanks great site great help.