GTA

Airguns by Make and Model => Daisy Airguns => Topic started by: bazthespazz on April 30, 2014, 01:05:20 PM

Title: Daisy Power Line 41
Post by: bazthespazz on April 30, 2014, 01:05:20 PM

I'm looking for an exploded parts diagram for a Daisy 41. I already contacted Daisy and believe it or not they have no info on it. Mine came with an owners manual so I scanned it and sent them a copy and have already received a "WOW, Thank You" back. I've rebuilt several 780/790's but the 41 has a different valve that uses a face gasket to seal the CO2 cartridge. Any help would be greatly appreciated.

Title: Re: Daisy Power Line 41
Post by: hogrider04 on April 30, 2014, 01:31:30 PM

Don't know if this will help or hurt, but here's what I found. Copied it from another site..........The Daisy 41 is the same design as the S&W 78G, 79G, Daisy 780 and 790. Check out this link and the website it's from. He has several articles on rebuilding and resealing these pistols.
http://anotherairgunblog.blogspot.com/2010/04/quick-fix-smith-wesson-78g-from-findlay.html (http://anotherairgunblog.blogspot.com/2010/04/quick-fix-smith-wesson-78g-from-findlay.html)

Here's a link to the 78G if in fact it is similar to yours.
http://stevespages.com/pdf/s&w_78g_79g_air_pistol.pdf (http://stevespages.com/pdf/s&w_78g_79g_air_pistol.pdf)

Good luck,
Jerry

Title: Re: Daisy Power Line 41
Post by: bazthespazz on April 30, 2014, 07:00:28 PM

Thanks Jerry. The 41 differs from the 780/790 in that it uses a face seal to seal the end of the CO2 cartridge to the valve body. The 780/790, 78G/79G have a sealed CO2 cap similar to the Crosman MKI/MKII's. I've rebuilt several of the 780's but these have a different valve and I'd like to see what I'm getting into before I tear it open.