GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: Norm_m on April 19, 2014, 03:12:30 PM

Title: .177 MRod barrel
Post by: Norm_m on April 19, 2014, 03:12:30 PM

What is the OD of a .177 MRod Barrel? I know the .22 is 1/2" but not sure of the .177

Thanks
Norm

Title: Re: .177 MRod barrel
Post by: RayK on April 19, 2014, 03:42:13 PM

Only the 25 cal is 1/2 inch OD.

Both the 22 and 177 are 7/16 = .4375 inches.

(I just measured the ones I have sitting on my work bench with my calipers to verify it.)

Ray

Title: Re: .177 MRod barrel
Post by: Norm_m on April 19, 2014, 04:52:50 PM

Thanks Ray I was thinking the .22 was 1/2"

Norm