GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: mcc1961 on April 16, 2014, 04:35:52 PM

Title: Adjustable single piece valve stem
Post by: mcc1961 on April 16, 2014, 04:35:52 PM

I got this valve stem with adjustable inserts for the  .25 condor.I can use the small one for plinking or use the larger one or leave the inserts out for max power.

Title: Re: Adjustable single piece valve stem
Post by: mcc1961 on April 19, 2014, 04:50:43 PM

Put the smallest valve insert in and the condor is down to around 820fps with benji domes in .25.

Title: Re: Adjustable single piece valve stem
Post by: starlingassassin on April 19, 2014, 05:16:53 PM

ohhhhhhhh pretttyyyy :)


ive been eyeing those TT stems for a while now.


hows the accuracy when you slowed it down?


have you chrono'd with the large insert?

Title: Re: Adjustable single piece valve stem
Post by: mcc1961 on April 19, 2014, 08:05:14 PM

I have not shot any targets with it , just chronyed it.The only restrictor I have tried is the smallest one, don't know if I will even need the larger one.I have not shot it without either one yet but it is supposed to increase of 30-50fps.Definitely worth the money.

Title: Re: Adjustable single piece valve stem
Post by: mcc1961 on April 20, 2014, 06:24:23 PM

Went target shooting today and it was a little windy and my groups opened up a little at 25yds with the small restrictor.Got between 40-50 shots in 1 fill, this is great not to have to pump after 5 shots to keep from having to pump so much.Also the rifle is much quieter also.