GTA

Support Equipment For PCP/HPA/CO2 and springers ,rams => Support Equipment For PCP/HPA/CO2 => Topic started by: stevemag on March 25, 2014, 10:38:33 PM

Title: rap4 12 gram co2 adapter
Post by: stevemag on March 25, 2014, 10:38:33 PM

has anyone used this in a hammerli 850 with a paintball tank adapter ?
i know the adapter has a pin for the tank but i think this has no pin. it has to be attached before you load the 12 gram cartridges. although I'm not really sure. good to have an option when the 9oz tank is empty.


http://rap4.com/paintball/os/disposable-adapter-p-239.html (http://rap4.com/paintball/os/disposable-adapter-p-239.html)

Title: Re: rap4 12 gram co2 adapter
Post by: Bill L. on March 26, 2014, 05:18:03 PM

I use the single in my .177 850 and it works fine.
http://www.rap4.com/store/paintball/p/003506/quick-change-12g-co2-adapter (http://www.rap4.com/store/paintball/p/003506/quick-change-12g-co2-adapter)

Title: Re: rap4 12 gram co2 adapter
Post by: Geoff on March 26, 2014, 05:34:24 PM

I have one like Bill shows.  Use it on my 2400kt, which is set up like your 850 for 88g Co2 carts.   I got mine off ebay for 10$ shipped.  Works just fine when I tested it upon arrival.  I only get about a dozen shots from my 22 cal 2400kt with max flow valve in it.

Title: Re: rap4 12 gram co2 adapter
Post by: stevemag on March 26, 2014, 08:45:44 PM

I've read about a few people having problems opening them after use...

Title: Re: rap4 12 gram co2 adapter
Post by: SeanAT on March 27, 2014, 08:46:31 AM

Steve, I have a couple of those since I own a few of their .43 cal markers. It does have a pin valve, so once the carts are pierced you just use it like you would any paintball tank.