GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: wgpennington on March 24, 2014, 02:15:55 AM
-
I recently purchased a Benjamin Marauder .25 synthetic stock. I either have a lemon, or the gun needs a complete tune.
Any adjustments to the trigger tried basically showed little (if any) difference. I am not new to this sport by no means. I am 60 years old, have owned a Diana model 75, HW model 77, Feinwerkbau model 90 pistol, and a Beeman R1. I still own and shoot regularly a Feinwerkbau model 300s w/walnut stock that will put EVERY pellet in the same tiny .177 hole. I realize that the marauder is a hunting rifle and do not expect a match trigger or 1 hole group at 50 yards, but the reviews that I read all portray a Much better trigger and accuracy. Help.....is this a defect, if no, who would you recommend to do a great tune job including barrel if absolutely necessary.
Best regards,
Bill
-
Bill, you need to remove the lawyer spring. Once you do that the trigger will transform. you can find you tube videos on this.
Just remove the cover plate carefully. You move the spring on the bottom right of the trigger assembly. Then Add a couple of washers in place of the trigger. But the cover plate back on. And then you will have an amazing trigger.
Hope This helps
-
Welcome to the GTA.
Richard