GTA

Airguns by Make and Model => Diana Airguns => Topic started by: pappa on March 03, 2014, 12:23:49 AM

Title: Mike Melick's newest T05 mod for T05 triggers - possible perfection!
Post by: pappa on March 03, 2014, 12:23:49 AM
For those with rifles using T05 triggers, Mike Melick at Flying Dragon Air Rifles has come up with the perfect mod for the T05 trigger on RWS rifles or clones of that design. The old mod was simply the addition of a standard blade screw that allowed adjustment of the weight of let-off of the trigger.

The new mod is the same mechanically, but instead of a simple single blade screw requiring the trigger to be outside of the stock to adjust, Mike has changed both the original rear and the new front screw to use the same small Hex-headed screws which allows adjustment while in the stock without any further need for dismantling by removing the stock. This eliminates the need to use a screwdriver from a straight open trigger. Really great and professional selection of screws and a matching locking nut on the front screw. Just received 5 moded triggers from Mike and they are all proving to be the cat's meow for adjusting the T05.

And, as usual from Mike, they are a really cheap buy for what you get and his turnaround in getting your trigger blade back is phenomenal.

Try it, You'll really like it!
Title: Re: Mike Melick's newest T05 mod for T05 triggers - possible perfection!
Post by: oldwolf on March 03, 2014, 02:21:18 PM
Sounds great. once I get my D52 running again I may go for the trigger mod.