GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: doninva on February 27, 2014, 09:28:26 PM

Title: Does the Maruader barrel screw in ?
Post by: doninva on February 27, 2014, 09:28:26 PM

Was cleaning my Maruader today, it  wasn't shooting to good. I went to turn the shroud nut and the barrel turned. I screwed it back tight but does it have a set screw? Called PA for some help but forgot to ask about the barrel. Thanks, Don

Title: Re: Does the Maruader barrel screw in ?
Post by: Motorhead on February 27, 2014, 09:40:35 PM

Barrel is SLIP FIT within receiver. Two grub screws top of receiver hold location and prevent movement.
These 2 grub screw index on milled flats on barrel.


Only picture I have ( this a barrel coversion but OEM barrel mounts the same  ;) )

(http://i1320.photobucket.com/albums/u532/scott_schneider1/DSCF0728_zps3a1c1bcf.jpg)

Title: Re: Does the Maruader barrel screw in ?
Post by: doninva on February 27, 2014, 10:28:36 PM

Thanks Motorhead, you are the man. My grub screws are loose. May be why my gun is changing POI. Don