GTA
All Springer/NP/PCP Air Gun Discussion General => Air Gun Gate => Topic started by: Wolfdog91 on February 07, 2014, 10:35:07 PM
-
I'm a multi pump shooter and I'm on a mission to try and find some serious multi pump air rifles ( I love my 880,2100,1322/77 M4-177 but I wanna up grade ) But so far it's not been easy it's all springers and PCP's :P Any how I've Recently heard of the Webly Raider look awesome but apparently it's got some seal problems and its hard to pump ( Reminded me of the Sheridans ;D ) . Is this a good rifle and are their any others out their I figured Industry would have something any advice/suggestions would be nice!
Thanks
-
What about a 397, Blue Streak or a 392? Of course you could always get a 2289 and mod it a whole bunch.
-
Older Crosman 1400/140 series, S&W 77A, The only Chinese pumper I know about is the Webley Rebel. Or you could just build yourself one. ;D
-
google mr sterne"s "uber pumper" and then bulid one.......I may try
-
I say keep your eye out for an older Sheridan .20 cal. Can't go wrong with one of those.
-
What about a 397, Blue Streak or a 392? Of course you could always get a 2289 and mod it a whole bunch.
A'm saying it looks to me like a modded blue streak with a synthetic stock ;D
-
google mr sterne"s "uber pumper" and then bulid one.......I may try
Are you taking about this http://www.americanairgunhunter.com/quigley.html (http://www.americanairgunhunter.com/quigley.html) because the first coulpe of sites that came up were well...........
-
these are beautiful !
(http://www.airgunspecialist.com/images/longbarrel.jpg)
(http://www.airgunspecialist.com/images/carvings.jpg)
http://www.airgunspecialist.com/index.html (http://www.airgunspecialist.com/index.html)
-
google mr sterne"s "uber pumper" and then bulid one.......I may try
Are you taking about this http://www.americanairgunhunter.com/quigley.html (http://www.americanairgunhunter.com/quigley.html) because the first coulpe of sites that came up were well...........
No, here: http://www.gatewaytoairguns.org/GTA/index.php?topic=39328 (http://www.gatewaytoairguns.org/GTA/index.php?topic=39328)
-
google mr sterne"s "uber pumper" and then bulid one.......I may try
Are you taking about this http://www.americanairgunhunter.com/quigley.html (http://www.americanairgunhunter.com/quigley.html) because the first coulpe of sites that came up were well...........
O that yes i do recall readin some of that but didn't think much of it at the time I realy like the concept but Ill probably go crazier than I am now trying to build it ! ;D
No, here: http://www.gatewaytoairguns.org/GTA/index.php?topic=39328 (http://www.gatewaytoairguns.org/GTA/index.php?topic=39328)
-
these are beautiful !
(http://www.airgunspecialist.com/images/longbarrel.jpg)
(http://www.airgunspecialist.com/images/carvings.jpg)
http://www.airgunspecialist.com/index.html (http://www.airgunspecialist.com/index.html)
WOW those are way to nice for me ! they'ed have scratches all over them after an hour with me ;D
-
Yeah, I'd go for a used Benji 34x or 39x or the Sheridan streak. Lots of used ones around, not too expensive.
-
I have shot some of the "High end" pumpers and really was not impressed at all. If you take a 2289g, make an aluminum adjustable cup piston (that uses the original cup seal), shape the valve assy face to match the inside of the cup seal, put a shim around the valve in front of the O-Ring to take up the dead space between the O-Ring and the valve face, insert a shim in the front of the check to take most of the dead space in the inlet port, and angle and widen the exaust port, make a slightly larger transfer port, you end up spending about $90 including the gun and you have a gun that can pretty well keep up with the high end pumpers, is a lot easier to work on, and is a lot more accurate.
Though that is just my $0.02 worth.
-
How about the FX Indy?
http://www.fxairguns.com/rifle/the-indy/ (http://www.fxairguns.com/rifle/the-indy/)
http://www.youtube.com/watch?v=nNqr4As-p2E# (http://www.youtube.com/watch?v=nNqr4As-p2E#)
looks pretty trick.