GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: Airgun.Sniper on January 23, 2014, 04:55:25 PM

Title: Convert .177 to a .25 gen I Mrod
Post by: Airgun.Sniper on January 23, 2014, 04:55:25 PM

 What are the parts needed for the conversion?

 Thanks

Title: Re: Convert .22 to a .25
Post by: Motorhead on January 23, 2014, 07:09:55 PM

Jay,
You should really go about this with a cooler head and not get combative on whats yet to be shared or said  :P

So let be the fist in asking an obvious question .... What Rifle ?

Due to past threads & reference to gen II for now will assume a Marauder  ;)

The .25's have DIFFERENT Valves / Transfer passage size / Receiver / Barrel  ::) / Bolt / Baffles /  Air stripper / Shroud mount & End cap
* Valve, Transfer tube, Baffles and Cap you could work around with some mods, the rest is a MUST CHANGE.

Title: Re: Convert .22 to a .25
Post by: Rdsail on January 23, 2014, 08:51:35 PM

I completely agree with Motorhead