GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: Bwalton on December 07, 2013, 11:41:26 AM
-
I know that there is not a lot out there in mods for this rifle, If there are any that I missed please let me know. So far I sent it to TKO Airguns to Mike for a full CF Shroud, Got a CO2 cap from @=S+S%^$#, he did not have the bulk-fill caps in stock. Has a good scope on it, UTG Compact W/glass Ret 3-9X44. I am going to buy the Hammerli 850 AirMagnum I saw that a lot can be done to those as well. I guess there will be more upgrades available as time goes on seeing that this rifle just came out this year.
-
Mike did a great job with the Fusion at TKO ;D ;D
-
check for MM';s post inre the x60c .. he talks about a few things that boost that rifles fps and they seem to be similar enough some would work. I adjusted the cocking spring on mine and gained a little speed.
on a side note ... 13.43 JSB's are giving me 10FPE .. MUCH better than anything lighter, so you might want to check some of those out if the FPE isn't up to your liking
-
Thank you so much for that info, I will look into it all.
-
Just got her back from Mike@ TKO, he did a wonderful job!
-
looks nice
-
Oh here is my shot group with Pred polymax
-
Loving the Umarex Fusion! This gun is tops! The best around the house gun that I have ever had by far! more power then the Crossman 2100, Daisy P/L 901, Benjamin 397, Daisy 880..... this thing is so quite that you have to have a chrono to know just how much power she is putting out. shooting 8gr@ 690fps for 8.45ft-lb could go to a 10gr pellet but don't need to. Thats stock, now when I send it out to be tuned he said that he can get me 100fps more which would put it @ 790fps or lets just say it was only 60fps more that a good 10ft-lbs. As accurate as the Fusion is this would make for one fun yard gun! Im going bulk fill before I send it out.