GTA

All Springer/NP/PCP Air Gun Discussion General => Machine Shop Talk & AG Parts Machining => Engineering- Research & Development => Topic started by: nced on September 11, 2013, 09:27:43 AM

Title: Need advice.....how to make a Rekord set back trigger blade.
Post by: nced on September 11, 2013, 09:27:43 AM

In the past I've done a Quick and dirty setback trigger blade for a Rekord trigger by cutting off the old blade, then drilling and tapping the "stub" for a hokey screwed on bent aluminum blade.

I'm considering the making of a brass set-back trigger blade for a Rekord trigger and was wondering what's the best way to position the two "short dowels" inset in the "top" relative to the pivot pin hole shown on part number 50c..........
(http://img.photobucket.com/albums/v734/wved/Airgun%20Mods/rekord_trigger_1.jpg) (http://smg.photobucket.com/user/wved/media/Airgun%20Mods/rekord_trigger_1.jpg.html)