GTA

Airguns by Make and Model => Vintage Air Gun Gate => Topic started by: squirrelsniper on May 15, 2013, 08:31:00 PM

Title: crosman 101?
Post by: squirrelsniper on May 15, 2013, 08:31:00 PM

I have an early Crosman. 177 pump that I believe is a 101. Is the .177 model the 101 or 100? I know one was the. 22 model. I also need to replace barrel and get new seals. Is there any good source for parts? I have heard an aftermarket 1377 barrel works if get one long enough.

Title: Re: crosman 101?
Post by: strever on May 15, 2013, 08:40:54 PM

.177 cal is the 100
.22 cal is the 101
why do you need to replace the barrel?

Title: Re: crosman 101?
Post by: squirrelsniper on May 17, 2013, 11:12:54 PM

Someone drove a steel rod down it to keep it from firing. I have tried to drive it out but no luck. I'm scared of destroying the barrel although its pretty much shot as is. The rest of the gun is really slick though.

Title: Re: crosman 101?
Post by: strever on May 18, 2013, 06:26:50 PM

i would ask over at   American"Vintage Airguns" http://www.network54.com/Forum/405945/  (http://www.network54.com/Forum/405945/)
who has a spare barrel, or what can be made to work.
the .177 are not as common as the .22
you will have to join

the last time i had my 22 barrel off i thought it looked like i could use a Discovery barrel but i did not follow up on that thought