GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: jaytime25 on March 14, 2013, 11:35:59 AM
-
This is a group of 8 shots at 45yards. Was indoors and bench rested. But none the less was very impressed. Filled to 3000 psi and after 8 shots down to 2000 psi. velocity was at 993, 988, 986, 983, 979, 976,974,971
(http://i631.photobucket.com/albums/uu31/jaytime25/a2543bc7-f388-4db0-af6a-12046f3c6ef5_zpsb495b6ab.jpg)
-
Nice !! What pellets were you shooting?
Mike
-
Nice group. :)
45yd indoor range, I'm jealous!
-
awsome groups like to know what pellets you are shooting.
-
Sweeet! That's a keeper.
-
(http://i631.photobucket.com/albums/uu31/jaytime25/20130314_101157_zpsf1600cca.jpg) supprisingly very accurate. Im impressed. Seems like they were more accurate at this range than benjamin domes 27.8 grains were. havent tried jsb kings yet
-
JSBs are what I use. Had my AG bench mounted and tried 4 kinds. JSB group best followed by Benjamin.
MIke
-
Wow nice group. Congrats.
-
Incredible group. What mods have been done to the rifle?
Thanks.
-
Incredible group. What mods have been done to the rifle?
Thanks.
change orings to the heavy duty white ones, pulled valve out and ported out and polished the air hole and also ported and polished out the transfer port. Also switched spring to 10lb. Dunno diameter size, standard hole size was 1/8 drill bit, went up to 9/64. then used dremel to smooth out and polish. Also opened up a tad of the port on the action side of gun to same size
-
JSBs are what I use. Had my AG bench mounted and tried 4 kinds. JSB group best followed by Benjamin.
MIke
A little has to do with no wind at all indoors :P
-
ummm...9/64 is about .140' if your stock porting was smaller than that something wrong happened. The 22 and 177 are .125 and the 25 cal has .140 passages for the sleeve and exhaust port.
cheers,
Douglas
-
ummm...9/64 is about .140' if your stock porting was smaller than that something wrong happened. The 22 and 177 are .125 and the 25 cal has .140 passages for the sleeve and exhaust port.
cheers,
Douglas
Guess somethung wrong happened.. when I put that bit in I could not turn it...so I put it in opened it up a little..then used a dremel sanding bit to finish opening up..not a whole lot...but then pilished the pirt to make it smiith as *(&^
-
Do you always use such pretty pink ribbon on your targets? LOL! Just kidding ya. AWESOME group!
-
Very nice grouping.
-
Do you always use such pretty pink ribbon on your targets? LOL! Just kidding ya. AWESOME group!
"That's not pink! That's Fuchsia!"
(http://static.guim.co.uk/sys-images/Lifeandhealth/Pix/pictures/2010/6/16/1276689489726/The-Gay-Pride-parade-in-B-007.jpg)
-
Nice group!
-
Do you always use such pretty pink ribbon on your targets? LOL! Just kidding ya. AWESOME group!
Is my wife's bat tape
-
Jay hows that FX 30 boss?
Oaks
-
got rid of it to buy a cricket
-
Still have the Benjamin?
Oaks