GTA

All Springer/NP/PCP Air Gun Discussion General => Machine Shop Talk & AG Parts Machining => Engineering- Research & Development => Topic started by: Bent on March 10, 2013, 05:26:42 PM

Title: Where to buy electric valves for PCP's
Post by: Bent on March 10, 2013, 05:26:42 PM

Have been searching for these valves like the ones used in PCP's like the Daystate Panther.
But no luck so far...

Are they all OEM manufactored for the exact PCP gun? The ones I have found have way to long cycle times for the use in a PCP...

Title: Re: Where to buy electric valves for PCP's
Post by: Bent on March 13, 2013, 10:19:20 AM

 ??? Please forget that I asked.. ???

I was sure it was a solenoid valve.... but it's just a solenoidhammer   ???

Title: Re: Where to buy electric valves for PCP's
Post by: Rescue912 on March 13, 2013, 12:35:33 PM

I've experimented with the spool out of a hydraulic valve and one of the solenoids off a 2-way. Picked valve up for free at a local scrap yard so had to try  8)

Title: Re: Where to buy electric valves for PCP's
Post by: rsterne on March 13, 2013, 02:52:29 PM

PM lloyd-ss , he might know....

Bob

Title: Re: Where to buy electric valves for PCP's
Post by: Motorhead on March 13, 2013, 02:58:09 PM

As to WHERE a solenoid & control board / micro switch could be found to trip a conventional sear ?

Some SPYDER Paintball guns have them ....
Look HERE: http://www.paint-ball-gun.net/spyder-paintball-guns/spyder-electronic-trigger/ (http://www.paint-ball-gun.net/spyder-paintball-guns/spyder-electronic-trigger/)

Middle EM1 is IMO one you want for guts ...