GTA

All Springer/NP/PCP Air Gun Discussion General => European/Asian Air Gun Gates => China/Asian AirGun Gate => Topic started by: PaperPunch1 on March 01, 2013, 08:12:39 PM

Title: Ninja13@850=QB79(in.22)=Pellet choice?
Post by: PaperPunch1 on March 01, 2013, 08:12:39 PM
Shot mine today at 25yds, starting at 2500psi. Getting good groups (when there ain't flyers) shooting off a bench. Groups are nickel size except for the flyers. I am shooting JSB15.8gr and they have a soft skirt. I'd like to be confident in ALL shots (you never know where the flyer is going to come) so any suggestions on pellet choices to try?
The head dia on my 15.8's is 5.52.
The new tins I have of JSB 18.13gr are not marked with head dia. any chart available?
Thanks for any info you folks can give!
PaperPunch1
Title: Re: Ninja13@850=QB79(in.22)=Pellet choice?
Post by: Raizer on March 02, 2013, 08:15:54 AM
Should be a sticker on the bottom of the JSB tins with the head size on it.
If its anything like mine was (ok groups but lots of flyers with JSBs), it won't shoot any other pellets too well.
Title: Re: Ninja13@850=QB79(in.22)=Pellet choice?
Post by: jonnnyboy on March 02, 2013, 11:49:38 AM
Hey Paul, don't automatically jump to the expensive pellets with the QB guns.  A lot of the guys have reported excellent results with unexpectedly cheap pellets, so try different ones and you might be surprised.  My QB's all like a group of different pells including the daisy and cheaper Crosmans.  Let us know what you find.

joe
Title: Re: Ninja13@850=QB79(in.22)=Pellet choice?
Post by: Mebits on March 02, 2013, 02:46:32 PM
My QB really likes the JSB exact expresses at 14.35gr. I mean REALLY like 'em.

Surprisingly, the CPHP's shoot well enough out of the gun too. So do the RWS Super HP's. Still, the JSB's are the best. Mine didn't really like the Eunjin pellets and I'm thinking that staying on the lighter or mid weight range is better.

Mine is regulated at 1100 psi.

M
Title: Re: Ninja13@850=QB79(in.22)=Pellet choice?
Post by: wilsonj1018 on March 03, 2013, 12:30:05 AM
mine eats crosman pointed 22s and jsb 18.13s makes a single hole at 25yds but then goes spiraling out of control. my bore is a bit loose
Title: Re: Ninja13@850=QB79(in.22)=Pellet choice?
Post by: nervoustrigger on March 03, 2013, 01:21:58 AM
Quote from: PaperPunch1 on March 01, 2013, 08:12:39 PM
The new tins I have of JSB 18.13gr are not marked with head dia. any chart available?

The tin that I just received from Amazon measured dead-on 5.50mm as typical. 
Title: Re: Ninja13@850=QB79(in.22)=Pellet choice?
Post by: PaperPunch1 on March 03, 2013, 05:27:19 PM
OK thanks nervoustrigger....I don't have a caliper marked off in mm., just 1000ths.
Thanks for the jsb info, my newer tins aren't marked like my older ones with a sticker.
PaperPunch1