GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: JPowell490 on February 25, 2013, 03:11:42 PM

Title: Need some help with purchase I made (Marauder)
Post by: JPowell490 on February 25, 2013, 03:11:42 PM
Hey guys,

So I just ordered the following from PA.  I am pretty sure that the hand pump I ordered will have the correct fitting for the Marauder right?  Anything else missing, please feel free to chime in.  I already ordered my scope and stuff a while back.

Benjamin Marauder Rifle Mag, .25 Cal, 8rds Quantity (2)

UTG Universal Bipod, Telescoping Legs, Picatinny & Sling Swivel Mount

Crosman Silicone Chamber Oil Quantity (2)

Shooting Chrony Beta Chronograph, Blue

Benjamin Marauder Air Rifle .25 Caliber

Benjamin Hand Pump, Fits Crosman & Benjamin PCP Guns

Benjamin Destroyer .25 Cal, 27.8 Grains, Pointed, 200ct
Title: Re: Need some help with purchase I made (Marauder)
Post by: GadgetX on February 25, 2013, 03:21:54 PM
Guaranteed fun !!

I would consider trying a tin of JSB Exacts.  I have tried 5-6 different kinds of pellets.  Always go back to the JSB Exacts (25.4 gr).  They seem to shoot better and group much better.  Make sure to clean barrel before you shoot.  Goo Gone > nylon brush and patches until clean.  Not sure about scope, 50mm required tall rings.  You will need much more pellets also.

Be safe !!

Mike
Title: Re: Need some help with purchase I made (Marauder)
Post by: randall686 on February 25, 2013, 03:23:16 PM
Hey guys,

So I just ordered the following from PA.  I am pretty sure that the hand pump I ordered will have the correct fitting for the Marauder right?  Anything else missing, please feel free to chime in.  I already ordered my scope and stuff a while back.

Benjamin Marauder Rifle Mag, .25 Cal, 8rds Quantity (2)

UTG Universal Bipod, Telescoping Legs, Picatinny & Sling Swivel Mount

Crosman Silicone Chamber Oil Quantity (2)

Shooting Chrony Beta Chronograph, Blue

Benjamin Marauder Air Rifle .25 Caliber

Benjamin Hand Pump, Fits Crosman & Benjamin PCP Guns

Benjamin Destroyer .25 Cal, 27.8 Grains, Pointed, 200ct
Loose the Crosman chamber lube (petroleum derivatives i've been told) and the destroyers (they destroy accuracy)
Other than that the hand pump comes with a 1/8 male that fits you marauder 1/8 female.
Title: Re: Need some help with purchase I made (Marauder)
Post by: Clifford on February 25, 2013, 04:19:29 PM
Be prepared to shoot a lot of pellets! Consider ordering a few different kinds of pellets though, so you can see what your rifle likes
Title: Re: Need some help with purchase I made (Marauder)
Post by: Nomadic Pirate on February 25, 2013, 04:24:16 PM
I would definatly change the choice of pellets, the Benjamin Domes are much better, my Maurader .25 was shooting the 31gr Baracuda real, real well
Title: Re: Need some help with purchase I made (Marauder)
Post by: JPowell490 on February 25, 2013, 04:29:43 PM
Great to know, thanks everyone!

In a previous order I bought a Leapers UTG 6-24x50 AO, Illuminated Mil-Dot Reticle.

I hope the Marauder likes the Benjamin Domes, because in the same order as the scope, I purchased 20 tins of them in .25 cal.  4000 pellets :)

So we will see how it does, if it doesn't like those, I will order some JSB's.  You guys are fantastic and were a big part of my decision.

I was going to get an Airforce Condor, and still might in the future, but the Mrod seems very nice.  Looking real forward to getting it!

I bought the crony as I have read that you can't really adjust the output to 3000 psi reliably without one.  Any truth to that?
Title: Re: Need some help with purchase I made (Marauder)
Post by: JPowell490 on February 25, 2013, 04:30:52 PM
Nomad,

As I was typing my reply you posted that, I have the domes covered!  Glad to hear they are a great choice, I read that they were.

The only reason those pellets are listed is because it was their package deal, gun - hand pump - pellets.  I will zero it with domes and just sit these to the side.
Title: Re: Need some help with purchase I made (Marauder)
Post by: Nomadic Pirate on February 25, 2013, 04:34:37 PM
I would Seriously consider selling the Benjamin pump brand new without using it even once and buy a HILL
Title: Re: Need some help with purchase I made (Marauder)
Post by: JPowell490 on February 25, 2013, 04:44:38 PM
Hmmm, are they that bad or is it just where people abuse them?
Title: Re: Need some help with purchase I made (Marauder)
Post by: GadgetX on February 25, 2013, 04:59:36 PM
You should be OK with the Benji Domes.  They were my MROD .25 second favorite.

I am probably going to sale my brand new (2 week old) Hill pump.  I found a 4000 PSI tank for buck & a quarter, so I won't need a top off.  Going for a SB pump in the near future.

Mike



Title: Re: Need some help with purchase I made (Marauder)
Post by: JPowell490 on February 25, 2013, 09:11:41 PM
So what about this pump thing?  Is the Benji no good?  If there is an issue, let me know and I can call early and have that switched out before they ship.

If it is ok, then no worries.
Title: Re: Need some help with purchase I made (Marauder)
Post by: Ddgrego on February 25, 2013, 09:52:26 PM
i would switch pumps also if you still can.
Title: Re: Need some help with purchase I made (Marauder)
Post by: JPowell490 on February 25, 2013, 11:14:03 PM
I will just stick with the Benji pump since it was part of the package deal.  I will also be buying a shoebox, so no big deal on the pump.

I really appreciate all of your input though, thanks.
Title: Re: Need some help with purchase I made (Marauder)
Post by: JPowell490 on February 26, 2013, 05:58:33 PM
Counting to 100..........

Ordered Monday morning at 10:00 a.m. from PA.  Just called and was told "it probably won't ship today" as well. 

Jessica went to check with the shipping manager, he had left before 4:30 p.m. today, super.........

800 dollar order, have to wait 3 days to ship, unreal.  Just called back and asked to cancel so I can order elsewhere, was told "it is on the pallet already packed, we can't cancel it".  Can't cancel it, can't ship it.  What a place.
Title: Re: Need some help with purchase I made (Marauder)
Post by: Dave1899 on February 26, 2013, 06:07:19 PM
Congrats on the Mrod purchase.  I'm sure you're gonna love it.  Now since the shipping date is a little longer than you expected you might use this time to strengthen those muscels for all the pump action you're going to get.  ;)
Title: Re: Need some help with purchase I made (Marauder)
Post by: Rescue35 on February 26, 2013, 07:18:59 PM
When I was in Newport TN it only took FedEx 2 days to deliver orders from PA. You will be having fun with your new rifle befor you know it.
Title: Re: Need some help with purchase I made (Marauder)
Post by: JPowell490 on February 26, 2013, 07:27:06 PM
Normally does only take 2 days, that is why I ordered it Monday morning early. 

I have no idea what they are doing at PA.  That place needs someone to take it over and straighten it up.  Could be world class with a little leadership.
Title: Re: Need some help with purchase I made (Marauder)
Post by: GadgetX on February 26, 2013, 07:30:04 PM
I talked to PA today.  Had a back order for a few weeks now. Four items that came in at different times but always one Back Ordered.  I canx and the lady said she did not blame me, that their system needed fixed.

Mike
Title: Re: Need some help with purchase I made (Marauder)
Post by: Sqrl Klr on February 26, 2013, 10:52:10 PM
Sorry to hear that Mike. I hope that changes in the future. Time will tell.
Title: Re: Need some help with purchase I made (Marauder)
Post by: Ahab on February 27, 2013, 01:36:53 PM
So what about this pump thing?  Is the Benji no good?  If there is an issue, let me know and I can call early and have that switched out before they ship.

If it is ok, then no worries.

The newer ones are fitted with a better formulation for the seals. I take care while pumping not to let it get hot by giving myself a rest every thirty pumps or so. Even the Hill will need the seals to be replaced eventually which is no big deal. Mine is used to fill an MRod and a Disco. Has been in use for better than a year now with no problems.
Title: Re: Need some help with purchase I made (Marauder)
Post by: JPowell490 on February 27, 2013, 05:48:16 PM
Thanks for the feedback Ahab.

My order shipped today finally......Really excited to receive it!  I like PA and they have been great to deal with, but man, they have to do something on this shipping of your items.