GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: linoww on February 21, 2013, 12:33:11 AM

Title: Ninja 4500 psi Tank( can i use it to fill my PCP rifle?)
Post by: linoww on February 21, 2013, 12:33:11 AM
I am just getting together my Talon package and wonder of these can be used.I see many paintball places  have  them and they are very reasonable and of a nice size.Also my used FX pump i got makes a weird raspy sound on the bottom stoke.Is this normal?

George
Title: Re: Ninja 4500 psi Tank( can i use it to fill my PCP rifle?)
Post by: Monkeydad1969 on February 21, 2013, 03:05:32 AM
Right now they can go to 2400 psi, by mid March they plan to go to 3000 psi.

Contact:
Ray Duncan
support@drozdmax.com

Joe
Title: Re: Ninja 4500 psi Tank( can i use it to fill my PCP rifle?)
Post by: leec on February 21, 2013, 06:31:44 AM
Tanks designed for paintball have a regulator set for 850 or 450 psi.So you would have to get a different regulator to be able to properly fill your pcp.
Title: Re: Ninja 4500 psi Tank( can i use it to fill my PCP rifle?)
Post by: Rescue35 on February 21, 2013, 08:28:32 AM
http://www.gatewaytoairguns.org/GTA/index.php?topic=42430.0 (http://www.gatewaytoairguns.org/GTA/index.php?topic=42430.0)

The raspy sound is probably the air passing the check valves.
Title: Re: Ninja 4500 psi Tank( can i use it to fill my PCP rifle?)
Post by: TimmyMac1 on February 21, 2013, 11:24:18 AM
Ninja has told us that they are working on the 4500 PSI Tanks delivery mechanism so the CF Tanks can be used to fill Airguns up to 3K. So the reg will be set for 3K and the rig will fit on any Painball Tank using the Pin valve (ASA) type valve. It will be complete with bleeder valve, fill whip and Quick Connect.
I'll get it as soon as it is available and carry the parts. I'm sure Ray will let us know the retail when he gets it all figured out.

TimmyMac1
Title: Re: Ninja 4500 psi Tank( can i use it to fill my PCP rifle?)
Post by: NinjaPaintballRay on February 21, 2013, 03:14:05 PM
Quote from: TimmyMac1 on February 21, 2013, 11:24:18 AM
Ninja has told us that they are working on the 4500 PSI Tanks delivery mechanism so the CF Tanks can be used to fill Airguns up to 3K. So the reg will be set for 3K and the rig will fit on any Painball Tank using the Pin valve (ASA) type valve. It will be complete with bleeder valve, fill whip and Quick Connect.
I'll get it as soon as it is available and carry the parts. I'm sure Ray will let us know the retail when he gets it all figured out.

TimmyMac1

We're getting close, Tim ;)   We're finalizing everything as I type this and will hopefully have something here shortly.  Manuals are done, products has been tested and are ready to go, just need to finish a few details and we'll be all set.  Ray will contact you as soon as we're able to