GTA
All Springer/NP/PCP Air Gun Discussion General => Air Gun Gate => Topic started by: sperho on February 18, 2013, 09:24:37 PM
-
Does anyone know if the pump @ $229 from the link below includes everything I need for a Benji Marauder (yes, I had to add a PCP to my collection)? It would seem that I would also need the hose and the Foster fitting, which makes Pilk pricing no better than anywhere else. Am I missing something?
http://www.pilkguns.com/masprlist.htm#hill (http://www.pilkguns.com/masprlist.htm#hill)
-
I went through a similar dilemma on what I needed for my AA S510. I would suggest talking to the guys over at pyramid air and see what adapter fitting you need. they probably have it in stock.
-
I went through a similar dilemma on what I needed for my AA S510. I would suggest talking to the guys over at pyramid air and see what adapter fitting you need. they probably have it in stock.
you should post this in the PCP gate, probably in support equipment area. it would likely get better response.
i'm pretty sure all you need is the pump, hose and a female foster fitting with 1/8" male BSP threads.
kgb
-
That is correct.
When I got my Hill pump, I wound up having to get the microbore hose whip w/ fitting from Pyramid for ~$55.