GTA

All Springer/NP/PCP Air Gun Discussion General => European/Asian Air Gun Gates => China/Asian AirGun Gate => Topic started by: CFH on February 10, 2013, 02:51:48 PM

Title: Ole gal back in service
Post by: CFH on February 10, 2013, 02:51:48 PM

Had for quite a few years, but then the end plastic piece cracked and became worthless.  Finally got around to fixing it yesterday using Crazy glue of all things.  So far so good, not a bad shooter really.

Tim

(http://s3.postimage.org/boel4ah77/SDC14611.jpg)

(http://s4.postimage.org/4nuba1yv1/SDC14612.jpg)

(http://s18.postimage.org/6x6oivtsp/SDC14613.jpg)

(http://s4.postimage.org/pxmiyn4jh/SDC14614.jpg)

(http://s7.postimage.org/ite8j74dn/SDC14616.jpg)

(http://s3.postimage.org/p80h741hv/SDC14617.jpg)

Title: Re: Ole gal back in service
Post by: bubba zanetti on February 10, 2013, 08:12:19 PM

What is it?

BZ

Title: Re: Ole gal back in service
Post by: CFH on February 10, 2013, 09:21:16 PM

I think (not a 100% sure) this is a Tech Force TF 38GD or TF B3-3. 

Tim 

Title: Re: Ole gal back in service
Post by: bubba zanetti on February 10, 2013, 09:26:43 PM

Cool you got it running.

BZ