GTA
Airguns by Make and Model => Hatsan Airguns => Topic started by: Mpac on February 09, 2013, 09:55:43 PM
-
The 1st pic is where I put it together to show how it was canted but used it anway.2nd pic is the long tophat I made from a rws 350 mag spring guide had to shape it and shorten the length so when cocked it wouldn't hit the rear spring guide.3 thru 8 is chrony 9th pic is my setup with the 47 coil but when I changed to 44 coil I put the piston slug in 1st then the spring with the tophat.I will go back with the 47 coil when available and will have to take out piston slug.The plywood was a 30 yard shot with the FTT's 1st shot completely thru usually it takes a couple of shots before it goes thru with my other guns but the hatsan shows no mercy.That one shot on chrony that low shot was the only one that shot 840's all the rest was in the 850's so that one low one messed up the extreme spread would of been like 12 es. my next lowest was 852.