GTA

Airguns by Make and Model => Hatsan Airguns => Topic started by: Berky on February 03, 2013, 01:44:38 PM

Title: Hatsan Model 25 Supercharger Pistol Mods?
Post by: Berky on February 03, 2013, 01:44:38 PM
I was thinking of getting one of these and was wondering what mods can be done to increase the performance, apperance and or accuracey? Thanks
Title: Re: Hatsan Model 25 Supercharger Pistol Mods?
Post by: mst3kpimp on February 11, 2013, 04:00:25 AM
REDUCING WOBBLE
  One of the biggest issues with this gun is the way the anti-recoil is set up, now it definitely works as I discovered but the setup allows the gun to wiggle every which way causing some inaccuracy.  Take out the three screws to separate the action from the plastic housing.  Now you can see how the two part sliding base works,  remove the spring and slide the base back you'll see it stops, you have to lift the tab to clear the rail allowing the pieces to slide apart.  It seemed to me that there was too much space between the rails and guide so I applied 3 strips of masking tape on each side and carefully slid the top half back on.  This made the gun more solid and stopped the wiggling.  I found with the tape in place the gun was harder to slide in fact if I slid it back it would not return to it's position but luckily the recoil and the action of loading will naturally return the gun to it's proper position.  over 500 shots later I find my shots are more consistent now and the gun just feels solid in my hand.
(http://images57.fotki.com/v81/photos/9/1793119/11052159/slidesmall-vi.jpg)

(http://images58.fotki.com/v511/photos/9/1793119/11052159/slideapart-vi.jpg)
Title: Re: Hatsan Model 25 Supercharger Pistol Mods?
Post by: longislandhunter on February 11, 2013, 09:49:37 AM
Mine is extremely accurate, very comfortable and  functions very nicely.... and that's straight from the box  :)    Shoots so nice I don't see the need to mess with it  :)

Jeff