GTA

All Springer/NP/PCP Air Gun Discussion General => European/Asian Air Gun Gates => China/Asian AirGun Gate => Topic started by: codytwoeyes on December 15, 2012, 12:09:14 AM

Title: question
Post by: codytwoeyes on December 15, 2012, 12:09:14 AM

I have made a mistake having just gotton a QB79 added a hpa tank. however i nicked the seal on the valve. so now it leaks. were can i buy just the seal. can i put a rubber seal in its place- AA wants me to buy a valve part to git the seal.so what the best way to go for this repair?

Title: Re: question
Post by: FNG54 on December 15, 2012, 12:42:42 AM

Are you talking about the o-rings on the tank regulator?
If so I think that is standard for a paintball tank.
If not I don't know enough to help.
I just got put a tank on my 79 today also.


Greg 

Title: Re: question
Post by: renowntwo on December 15, 2012, 01:07:41 AM

Again if you are talking about the o-ring on the tank, you may want to check with academy sports. They sell a small kit in their paintball/ airgun area that will work.

Title: Re: question
Post by: mcc1961 on December 15, 2012, 06:19:00 AM

Wally World sells a pack of the universal tank seals if that's what you need.Also you can get in touch with Flying Dragon airguns he might just sell you the seal.

Title: Re: question
Post by: codytwoeyes on December 15, 2012, 11:24:46 AM

not the tank the valve assembly  inside the gun

Title: Re: question
Post by: mikeiniowa on December 15, 2012, 12:25:41 PM

send me your mail address, will send two out to you....