GTA
All Springer/NP/PCP Air Gun Discussion General => Air Gun Gate => Topic started by: toddk63 on July 13, 2010, 10:48:47 PM
-
Mendoza RM600 Main Spring Dimensions
I took it out and measured it. Here it is:
ID .539 in.
OD .789 in.
wire .124 in.
OAL 13.0 in.
N = 41 or 42 (depending on if you count the end coils that don't really add any spring)
It doesn't appear that Maccari has anything that matches this.
Todd K.
-
Todd, If you are looking for a Mendoza spring you can get one from Umarex. I recently bought three from:
Anna Dalton
Consumer Firearm Specialist
Umarex USA
6007 South 29th Street
Fort Smith, AR 72908
Ph (479)646-4210 Ext. 507
www.umarexusa.com (http://www.umarexusa.com)
They were about $20 each, shipped