GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Big Bore AirGun Gate => Topic started by: simonwg905 on November 29, 2012, 02:24:15 PM

Title: Collapsible M4 / side folding stock for 909
Post by: simonwg905 on November 29, 2012, 02:24:15 PM

I had been asked about this a few weeks ago by a fellow member here.
I had been busy setting up / testing / modding those evanix 9mm models that I almost forget about it all.
Sorry for the late reply !
I used stocks from ATI n FAB !
They are both good!
They set up at different stock angles!
One is straighter n the other is at a steeper angle!
Both only require a little dremel work!
Just need a M10 bolt to bolt through the stock mounting point onto the 909 receiver.
Remember to look for stock fit for Remington 870 n u will have a good set up to mod on !
It helps a lot if u do travel around to get into Ur favorite Hunting spots !

Title: Re: Collapsible M4 / side folding stock for 909
Post by: strever on November 29, 2012, 03:08:57 PM

Simon
can you show a good closeup image of the modification ?

thanks