GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: ray in wi on November 20, 2012, 08:34:33 AM
-
Would the tube cap off a Prod and the Tube plug off a Disco interchange? I know that they are different part numbers. The reason I ask is that I want to put a M4 style butt stock on my Disco. I don't want the tippman style. I can find an adapter to put an M4 type butt stock on a Prod. So as the tubes are the same size would the Prod adapter work on the Disco? Or would anyone know of a adapter for the Disco? I'm sure I will have to shim the hammer spring but once set it'll be good to go.
Thanks
Ray
-
The PRod tube plug fits into the Disco tube but there is one small problem. The Prod plug is anchored to the tube by a different bolt pattern. If you are capable of drilling and tapping an accurate hole in the PRod plug it will fit like a glove. I have them on my website http://discosrus.net/disco-mods/ (http://discosrus.net/disco-mods/)
Scroll down to the Spring Pre-load Adjuster / Stroke Adjuster
Norm
Discos R Us
-
Thank you so much norm, I'll get an order out tonight. Man I love the GTA!!!!
With High Regards
Ray