GTA
Airguns by Make and Model => Vintage Air Gun Gate => Topic started by: Brewerja on September 25, 2012, 09:59:38 PM
-
Hey guys, a friend of mine asked me to take a look at his Daisy CO2 200 air pistol because it leaks BAD. I took it apart, inspected the "seals" and found they were all intact. My findings were that the weird little spring at the top that pushes the elevator back down was missing. I tried fabricating one but i guess it uses a custom bent spring with very light tension. anybody have any experience with these little piles of poo? i found out daisy stopped making and selling parts for these things back in the 90's and offer a trade in credit for your old poo poo bb pistols, lol. Id like to fix this up for my friend, since i know all it needs now is the dang spring. thanks for reading guys,
-
i would try bryan and associates. they have lots of parts for older stuff. they may or may not have what you need but would be a good starting point. ;D
http://www.airgunbna.com/ (http://www.airgunbna.com/)