GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: mcc1961 on September 08, 2012, 10:10:37 PM

Title: Disco o-rings
Post by: mcc1961 on September 08, 2012, 10:10:37 PM

I need the numbers or sizes of the valve assembly and gauge port  inner & outer o-rings for a Disco .22 ?Thanks

Title: Re: Disco o-rings
Post by: Norm_m on September 08, 2012, 11:01:16 PM

the outer O rings for the valve & gauge units are AS568-016 3/4" OD 5/8" ID 1/16" thick
the gauge O Ring is #2-009 11/32" OD 7/32" ID 1/16" thick

You can get almost all the #'s from Crosman's website by click on Manuals and Parts Diagram at the bottom right side
http://www.crosman.com/pdf/manuals/BP1K77xx%20&%20BP9M22xx%20EVP.pdf (http://www.crosman.com/pdf/manuals/BP1K77xx%20&%20BP9M22xx%20EVP.pdf)
I Googled the AS568-016 and #2-009 to get the specs
Print out the Parts Diagram book as it is handy to have

Norm

Title: Re: Disco o-rings
Post by: mcc1961 on September 08, 2012, 11:38:16 PM

Thanks for the info!