GTA

Airguns by Make and Model => Vintage Air Gun Gate => Topic started by: Battlecry on May 05, 2012, 01:19:40 PM

Title: Belgium Hi-Score 801 (22cal.)
Post by: Battlecry on May 05, 2012, 01:19:40 PM

What do I lube the leather piston with? Its an old springer. And how can I find out what year it was made? There is a 4 digit ser. No. On the barrel.

Title: Re: Belgium Hi-Score 801 (22cal.)
Post by: RedFeather on May 14, 2012, 01:18:52 AM

You can use pure silicone oil.  Try a hobby shop which supports radio controlled (R/C) cars.  Supposed to be used for their shock absorbers.  Crack the barrel, add a few drops down through the transfer port (where the air comes out of the compression tube) and sit butt-down for a day or two to allow it soak in.  Some people like to mix two parts silicone oil to one part neats foot oil.

Is your 801 one of those with the cross-hatched checkering on the butt and the automatic pellet loader?  If so, these were made around late 50's.  Unique little guns.

Title: Re: Belgium Hi-Score 801 (22cal.)
Post by: Battlecry on May 15, 2012, 11:34:13 AM

Thanks RedFeather! I'll try that. The one I have must be from the 50s. Think I'll try to make a new piston sometime soon.

Title: Re: Belgium Hi-Score 801 (22cal.)
Post by: lizzie on May 20, 2012, 11:03:29 PM

Pix! We wanna see pix! ;D

Title: Re: Belgium Hi-Score 801 (22cal.)
Post by: Battlecry on June 09, 2012, 08:42:05 PM

60 year old springer is a lot of fun! Need to make a new leather pistoon

Title: Re: Belgium Hi-Score 801 (22cal.)
Post by: RedFeather on June 10, 2012, 12:46:23 AM

I believe there is a good tutorial about making leather piston seals on the Vintage forum.

http://www.network54.com/Forum/405945/ (http://www.network54.com/Forum/405945/)