GTA
Airguns by Make and Model => Hatsan Airguns => Topic started by: Magman116 on April 09, 2012, 08:51:38 PM
-
Those that may know, what is the stroke needed for a Gas RAM to fit the Mod95?
I think a Moller 90-100 red would work, but am unsure of the stroke length. I think the 90-125 would be too long.
Any ideas?
Thanks!
-Chris
-
Those that may know, what is the stroke needed for a Gas RAM to fit the Mod95?
I think a Moller 90-100 red would work, but am unsure of the stroke length. I think the 90-125 would be too long.
Any ideas?
Thanks!
-Chris
Chris,
Unfortunately, I don't know if the stroke on your model 95 is 100mm, or not. If it is, a 19mm x 100mm Nitrogen Gas Spring ( "gas ram" ) would be the size you would need.
The model 125's use a 125mm stroke length . . .
Dave
-
I found a thread where you posted some spreadsheets of different specs on compression chambers and there was the 105 listed. It has the same power plant as the mod95 and showed a piston stroke of 100mm. So, I would imagine the Moller 90-100 would work.
I think Gene used a n-forcer mf19-100 in a Daisy/winchester/mod95. I need to see if I can find the thread again.
-
I found a thread where you posted some spreadsheets of different specs on compression chambers and there was the 105 listed. It has the same power plant as the mod95 and showed a piston stroke of 100mm. So, I would imagine the Moller 90-100 would work.
I think Gene used a n-forcer mf19-100 in a Daisy/winchester/mod95. I need to see if I can find the thread again.
Click to ENLARGE !
(http://i1140.photobucket.com/albums/n561/Ez2cDave/springerchart.gif)
(http://i1140.photobucket.com/albums/n561/Ez2cDave/950135.jpg)
Dave
-
Dave, that was it. Thanks for posting it over here too.
I found Gene's thread on his Winchester 850x conversion using a Crosman RAM. The process should still be the same. He didn't post the stroke length or the specs of the Crosman RAM (size and stroke).
With the Hatsan 105 having a 100mm stroke length I will get that size gas RAM and see how the conversion goes. If I don't like it, I will put it in my Benji Trail.
-Chris
-
Dave, that was it. Thanks for posting it over here too.
I found Gene's thread on his Winchester 850x conversion using a Crosman RAM. The process should still be the same. He didn't post the stroke length or the specs of the Crosman RAM (size and stroke).
With the Hatsan 105 having a 100mm stroke length I will get that size gas RAM and see how the conversion goes. If I don't like it, I will put it in my Benji Trail.
-Chris
Chris,
Anytime !
Dave
-
check this out,might be of help.
http://translate.google.com/translate?tl=en&sourceid=ie8-activity&u=http%3A%2F%2Fwww.eliteairguns.com.br%2Fproduto%2Fdetalhe%2F1 (http://translate.google.com/translate?tl=en&sourceid=ie8-activity&u=http%3A%2F%2Fwww.eliteairguns.com.br%2Fproduto%2Fdetalhe%2F1)