GTA

Airguns by Make and Model => Cometa Airguns => Topic started by: Marc of france on March 23, 2012, 04:26:25 PM

Title: Cometa cocking and safety problem
Post by: Marc of france on March 23, 2012, 04:26:25 PM

Hi all

my cometa 400 fenix dont want cock ... And when i can cocking gun the safety dont work , safety is actioned in the rear but i can shot with the rifle  :o

Thx if you have an idea or solution  ;)

Title: Re: Cometa cocking and safety problem
Post by: Frank on March 23, 2012, 11:43:54 PM

You may have tried this. Did you pull the trigger again after shooting or before cocking? I have to pull the trigger a second time, every time, after shooting in order for it to cock. I sent it in to dealer to be fixed but was returned still having to pull a second time. I am just living with it.

Title: Re: Cometa cocking and safety problem
Post by: Charles Outdoors on March 24, 2012, 01:50:01 AM

 If the saftey is not working it may not be put together properly. When the trigger assembly is put back in the receiver there is a small linkage on the top left that must be sticking up and into the slot of the safety. If it is pushed down and out of place the safety won't work or be pushed out when cocked. It can also possibly cause it to bind and not cock every time, but I can't confirm that. I did have the sear to not lock good on mine and it slammed shut just as I loosened my grip on the barrel.
         

Title: Re: Cometa cocking and safety problem
Post by: geewhiz380 on March 28, 2012, 03:18:29 PM

 i had same problem til i adjusted the trigger...jorge