GTA
All Springer/NP/PCP Air Gun Discussion General => Air Gun Gate => Topic started by: VINNY on July 10, 2010, 12:52:30 PM
-
to shoot co2 guns? I have read the co2 is good between 60 - 90, both being close to the maximun temp.It sounds strange to me, but yesturday I took the 1077 out to shoot. It was just above 90 [per the news] I shot 2-12 gram bottles off and it worked great, then they all were leaking after that, and FAST. I have used this gun many times before w/ no problems. I then put the Air Source adapter on and it leaked just as fast. I also put a drop of Pellgun oil on most of the bottles, but not the last few, to see if it made a difference. I am going to try the 1077 again later, but I was just wondering if the above 90 degree weather had anything to do with it. Help?? ???
-
It was really warm here last weekend and my 2240 got almost too hot to hold from the Sun beating on it. At that point the hammer (mine is a bit on the soft side) wasn't strong enough to pop the valve so the gun wouldn't fire. But it was okay after it cooled off a bit.