GTA

Airguns by Make and Model => Diana Airguns => Topic started by: SMOKEY on February 23, 2012, 10:00:57 PM

Title: rws 48 breech seal
Post by: SMOKEY on February 23, 2012, 10:00:57 PM

can i change the breech seal on this gun without doing a tear down

Title: Re: rws 48 breech seal
Post by: s10gto on February 23, 2012, 10:07:21 PM

Yes but be very careful. Cock the gun then take a machine screw and thread it into the breech seal. You can then gently pry the seal out. They can be in there tight. Good luck
Dustin 

Title: Re: rws 48 breech seal
Post by: dwood5 on February 23, 2012, 10:17:18 PM

Yes . . . as s10gto said above. I use a 10-24 X 1" Socket Head Allen screw.

Title: Re: rws 48 breech seal
Post by: SMOKEY on February 24, 2012, 01:33:53 AM

thanks guys