GTA

Airguns by Make and Model => Benjamin Airguns => Topic started by: mtsheron70 on February 06, 2012, 03:56:29 PM

Title: Benji Trail NP barrel
Post by: mtsheron70 on February 06, 2012, 03:56:29 PM
Does anyone know if the barrel end (muzzle) screws off the shrouded barrel?  Reason I ask.....it has a end cap that appears may screw off???  Also at the beginning of the barrel it appears so as well???
Title: Re: Benji Trail NP barrel
Post by: skid9832004 on February 06, 2012, 06:07:09 PM
the shroud comes completely off. you just put the right size allen wrench into the muzzle cap end enough to NOT touch the barrel itself and turn it loose then the cap comes off and the shroud comes right off. and the barrel cannot come off the breech assembly it is one unit.
Title: Re: Benji Trail NP barrel
Post by: mtsheron70 on February 06, 2012, 06:10:41 PM
Quote from: Eric on February 06, 2012, 06:07:09 PM
the shroud comes completely off. you just put the right size allen wrench into the muzzle cap end enough to NOT touch the barrel itself and turn it loose then the cap comes off and the shroud comes right off. and the barrel cannot come off the breech assembly it is one unit.

Thanks Eric!
Title: Re: Benji Trail NP barrel
Post by: mtsheron70 on February 06, 2012, 06:33:03 PM
Wanted to do the Q-tip test to see if there were any hang up points at the barrel muzzle (exit).  I may have it crowned anyway to get the best accuracy from the gun.
Title: Re: Benji Trail NP barrel
Post by: skid9832004 on February 06, 2012, 06:35:10 PM
i never done a re-crown but its so easy the barrel is right there. if you got a wood screw and lapping compound i would.
Title: Re: Benji Trail NP barrel
Post by: microsalmo on February 06, 2012, 08:02:13 PM
The barrel is way down inside that allen cap.  Just grip the shroud, and turn the allen counter clockwise. 
Title: Re: Benji Trail NP barrel
Post by: Nate the airgunner on February 07, 2012, 10:28:34 PM
Im pretty sure it's a 1/4 inch allen.