GTA

All Springer/NP/PCP Air Gun Discussion General => European/Asian Air Gun Gates => German AirGun Gate => Topic started by: ivanpros on January 29, 2012, 11:53:58 AM

Title: TX200 MK III trigger lube?
Post by: ivanpros on January 29, 2012, 11:53:58 AM
I replaced the spring and piston with the Vortek kit, couldn't help myself and tore apart the trigger assembly. Does anyone recommend a replacement lube, the OEM was really sticky inside the entire trigger block assembly. I cannot find anything on the internet that resembles this. I noticed the Rekord trigger is very similar; maybe someone know what is used on these?


Edited:
Actually made in England but we do not have a England gate. Thought it best fit here.

CDT
Title: Re: TX200 MK III trigger lube?
Post by: Mark 611 on January 29, 2012, 03:51:30 PM
I'd use a 50/50 mix of super lube and moly, but thats just me! :P
Title: Re: TX200 MK III trigger lube?
Post by: s10gto on January 29, 2012, 05:58:25 PM
Marks suggestion will work great and this is the lube you removed.

http://www.google.com/url?url=http://www.airgunsofarizona.com/Napier.html%23NapierVP90GunGrease&rct=j&q=NAPIER+VP90+Gun+Grease&usg=AFQjCNFDB2DG8eEx3avIeiHYInh4qkIkyw&sa=X&ei=4sAlT-H5MIPW0QHh75m7Cg&ved=0CC8QygQwAA (http://www.google.com/url?url=http://www.airgunsofarizona.com/Napier.html%23NapierVP90GunGrease&rct=j&q=NAPIER+VP90+Gun+Grease&usg=AFQjCNFDB2DG8eEx3avIeiHYInh4qkIkyw&sa=X&ei=4sAlT-H5MIPW0QHh75m7Cg&ved=0CC8QygQwAA)
Title: Re: TX200 MK III trigger lube?
Post by: ivanpros on January 29, 2012, 10:12:24 PM
Thanks, I am presuming the VP90 would help with reducing vibration, minimize rust and water resistant? Moly could to the same I suppose, but what does the superlube add?
 
Thanks for moving this thread to German Gate, makes sense from looking at some of the Euro AR's
Title: Re: TX200 MK III trigger lube?
Post by: Mark 611 on January 30, 2012, 07:37:20 AM
it makes thing really slick it's {PTFE} Teflon :P
Title: Re: TX200 MK III trigger lube?
Post by: ivanpros on January 30, 2012, 10:30:38 AM
ahh got it! I will try it. Thanks a bunch.
Title: Re: TX200 MK III trigger lube?
Post by: tjk on January 30, 2012, 12:17:47 PM
Marks' advice is great advice. My only offering would be to go easy with grease textured lubes as they will over time catch and hold small particles of dirt/grit etc and cause inaccurate or 'false feel' of the trigger stages  and stop/release points.