GTA

All Springer/NP/PCP Air Gun Discussion General => Machine Shop Talk & AG Parts Machining => Wood Chop Shop (Working with wood) => Topic started by: Rocker1 on January 15, 2012, 05:40:52 AM

Title: STOCKS
Post by: Rocker1 on January 15, 2012, 05:40:52 AM

Few stocks I have did.  David

Title: Re: STOCKS
Post by: Airik on January 15, 2012, 12:53:19 PM

Nice work. I'm currently doing my first on the Storm XT. It sure is a burnout process. I got her stripped & sanded down to 150. Next step is some finer grit, then a good wet sand with finer to get the hairs off the top. Thinking about getting some vinyl lettering to put on the bare wood for masking "STORM" on the front and large "XT" on the butte before I stain. Going to have to test it though, since I want to use Minwax 'natural' color stain and not sure if the lettering will be visible after clear finish.

Title: Re: STOCKS
Post by: goodland on January 19, 2012, 01:24:43 AM

Very nice work and attention to detail.
My personal favorite is the silver streak. makes me want to get one

Title: Re: STOCKS
Post by: Tpatner412 on January 19, 2012, 01:39:03 AM

David have you had any luck with the new stock maker yet?

Title: Re: STOCKS
Post by: Pete on January 19, 2012, 02:07:11 AM

david
They look pretty darn nice..

Title: Re: STOCKS
Post by: ncpackrat on April 05, 2013, 02:04:34 AM

nice work David

Title: Re: STOCKS
Post by: GARY T on April 05, 2013, 10:29:59 AM

WOW....Looking forward to seeing more!